Universal-electronics DVR M1055F Manual de usuario descargar pdf (Pagina 22)

TROUBLESHOOTING

PROBLEM: Device key does not blink when you press a key.

SOLUTION: Replace the batteries with two (2) new AA

alkaline batteries (see page 9).

PROBLEM: Device key blinks when you press a key, but home

entertainment device does not respond.

SOLUTION: Make sure you are aiming the remote control at

your home entertainment device and that you

are within 15 feet of the device you are trying

to control.

PROBLEM: The remote control does not control home

entertainment devices or commands are not

performing properly.

SOLUTION: Try all listed codes for the device brand being set

up. Make sure all devices can be operated with

an infrared remote control.

PROBLEM: TV/VCR Combo does not respond properly.

SOLUTION: Use the VCR codes for your brand.Some combo

units may require both a TV code and a VCR

code for full operation (see page 12).

PROBLEM: No volume on a second TV.

SOLUTION: Follow instructions in Changing Volume Lock

(see page 20).

PROBLEM: PLAY and STOP keys do not work on a Motorola

DCT-2000 digital cable receiver.

SOLUTION: Re-program the CBL key for cable code 0476

(see page 10,Programming Device Control).

PROBLEM: Tried “Search Method”and still could not find a

working code.

SOLUTION: Try the “Search Method”again after clearing out

the device key as follows: Press and hold SETUP

until device key blinks twice, then release.Next

enter 9 - 9 - 2. Then press and release the device

key to be cleared twice.

PROBLEM: Remote control does not turn on Sony or Sharp

TV/VCR Combo.

SOLUTION: For power on, these products require program-

ming TV codes on the remote control.For Sony,

use TV code 0000 and VCR code 0032.For Sharp,

use TV code 0093 and VCR code 0048.

Atlas DVR M1055F1 9/3/04 7:30AM Page 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Sin comentarios

Universal-electronics DVR M1055F Manual de usuario Pagina 22